Flush Mount Plate FMP-32
$20.00
- Compatible with model number SP240V65KA surge protector
- Flush mount kit provides a clean safe mounting option when installing on a flat surface like drywall
- The flush mount plate measures 4.0 inches by 3.0 inches and is 0.125 inches think and made from black textured ABS plastic
This flush mount kit is suitable for Bad Wolf SP240V65KA surge protectors and provides a clean effective mounting option for drywall or other flat surfaces.
Product Details
| Weight | 2 oz |
|---|---|
| Dimensions | 4 × 3 × 0.125 in |
Specifications
Review the product details and product description for voltage, surge current rating, connection type, enclosure rating, wiring details, certifications, and other technical information.
For detailed product-specific ratings, refer to the specifications listed on this product page and any available product documentation.
Installation
Professional installation is recommended. Installation should be performed by a qualified electrician, licensed contractor, or qualified installer in accordance with the product instructions, applicable electrical codes, and local requirements.
The FMP-32 Flush Mount Plate is designed for use with the Bad Wolf SP240V65KA surge protector. Verify product compatibility before installation.
Flush Mount Installation Notes
- Choose an appropriate location for the flush-mount plate, typically above, beside, or below the electrical panel.
- Make sure the wall area is free of obstructions, such as studs, so there is enough space to route the surge protector conductors.
- Install the flush-mount plate close enough to the electrical panel so the provided wires can be safely routed into the panel.
- Use the provided cut-out template to mark the wall opening and mounting holes.
- The wall opening for the surge protector requires a 1-1/8" hole saw or drill bit.
- Remove the panel knockout that best aligns with the surge protector location.
- Attach the SP240V65KA surge protector to the flush-mount plate according to the installation instructions.
- Route the surge protector wires through the required conduit or fitting and into the electrical panel.
- Secure the flush-mount plate to the wall using the supplied mounting hardware.
Installer-Supplied Items
Mounting hardware is included with the FMP-32. The installer or customer must supply the necessary tools and any required conduit, fittings, or additional materials needed for the installation.
Important Safety Note
Turn off all power supplying the equipment before working on or inside the electrical panel. After installation is complete, restore power and verify that the SP240V65KA green status light is illuminated.
Refer to the FMP-32 installation instructions and the SP240V65KA product instructions for complete installation details.
Warranty
Bad Wolf surge protection devices include a 5-year product warranty.
Eligible products may also include connected equipment warranty coverage when properly installed and registered according to the warranty terms.
Please review the full warranty terms for complete details, limitations, registration requirements, and coverage information.
FAQ
What is the FMP-32 used for?
The FMP-32 is a flush mount plate used to provide a clean, finished mounting option for the Bad Wolf SP240V65KA surge protector.
Which product is the FMP-32 compatible with?
The FMP-32 is designed specifically for the Bad Wolf SP240V65KA surge protector.
Can the FMP-32 be used with other Bad Wolf surge protectors?
No. The FMP-32 is designed for the SP240V65KA only. Always verify the correct flush mount plate before installation.
Is the FMP-32 required to install the SP240V65KA?
No. The FMP-32 is optional. It is used when the installer or customer wants a cleaner, more professional finished look for the SP240V65KA installation.
Where is the FMP-32 installed?
The FMP-32 can be mounted on drywall or another suitable flat surface when flush mounting the SP240V65KA. Always verify the mounting surface and installation location before installation.
Does the FMP-32 provide surge protection?
No. The FMP-32 is a mounting accessory only. Surge protection is provided by the SP240V65KA surge protector.
Can the FMP-32 be used outdoors?
The FMP-32 should be installed in a location suitable for the SP240V65KA and the overall installation environment. Always follow the surge protector installation instructions and applicable electrical codes.
Who should install the FMP-32?
The FMP-32 should be installed by a qualified installer, electrician, contractor, or other person familiar with the SP240V65KA installation and mounting requirements.
Does the FMP-32 include the SP240V65KA surge protector?
No. The FMP-32 is the flush mount plate only. The SP240V65KA surge protector is sold separately unless otherwise stated on the product page.
